止回閥和球閥在功能、結構及適用場景上存在顯著差異，具體區別如下：

　　There are significant differences in function, structure, and applicable scenarios between check valves and ball valves, as follows:

　　一、核心功能差異

　　1、 Core functional differences

　　止回閥

　　check valve

　　主要作用 ：防止管道內介質逆向流動，避免倒流引起的污染、溫升或機械損壞。

　　Main function: To prevent the reverse flow of medium in the pipeline, avoid pollution, temperature rise, or mechanical damage caused by backflow.

　　適用場景 ：適用于需要單向流體控制的場景，如給水系統、污水處理等。

　　Applicable scenarios: Suitable for scenarios that require unidirectional fluid control, such as water supply systems, sewage treatment, etc.

　　球閥

　　ball valve

　　主要作用 ：用于切斷、分配和改變介質流動方向，同時具備調節功能。

　　Main function: Used to cut off, distribute, and change the direction of medium flow, while also having regulating function.

　　適用場景 ：適用于需要快速啟閉、流量調節或自動化控制的管道系統。

　　Applicable scenarios: Suitable for pipeline systems that require rapid opening and closing, flow regulation, or automated control.

　　二、結構特點對比

　　2、 Comparison of structural characteristics

　　止回閥

　　check valve

　　結構類型 ：包括旋啟式、升降式、球式等，密封面多為鐵基合金或鈷基硬質合金，耐磨耐腐蝕。

　　Structural types: including swing type, lift type, ball type, etc. The sealing surface is mostly made of iron-based alloy or cobalt based hard alloy, which is wear-resistant and corrosion-resistant.

　　工作原理 ：通過閥瓣沿通路中心線垂直移動實現開閉，部分類型（如旋啟式）需水平安裝。

　　Working principle: Opening and closing are achieved by vertically moving the valve disc along the centerline of the passage, and some types (such as rotary opening) require horizontal installation.

　　球閥

　　ball valve

　　結構特點 ：?jiǎn)㈤]件為球體，由閥桿帶動旋轉90°開啟或關閉，結構簡單、體積小。

　　Structural features: The opening and closing components are spherical, driven by the valve stem to rotate 90 ° to open or close, with a simple structure and small volume.

　　工作原理 ：通過球體與閥座的旋轉運動控制介質流通，適用于高壓力管道。

　　Working principle: Control the flow of medium through the rotational motion of the sphere and valve seat, suitable for high-pressure pipelines.

　　三、性能與適用介質

　　3、 Performance and Applicable Media

　　止回閥 ：密封性能依賴閥瓣與閥座的摩擦，耐磨性較好，但密封面易受介質沖蝕。

　　Check valve: The sealing performance depends on the friction between the valve disc and the valve seat, with good wear resistance, but the sealing surface is easily eroded by the medium.

　　球閥 ：流阻低（接近零），啟閉速度快（0.05-0.1秒），適用于高壓力、高流量的管道系統。

　　Ball valve: low flow resistance (close to zero), fast opening and closing speed (0.05-0.1 seconds), suitable for high-pressure and high flow pipeline systems.

　　適用介質 ：止回閥多用于水、油品、蒸汽等普通介質，部分特殊材質可耐化學腐蝕；球閥適用范圍更廣，包括腐蝕性液體。

　　Applicable media: Check valves are mostly used for ordinary media such as water, oil, steam, etc. Some special materials are resistant to chemical corrosion; Ball valves have a wider range of applications, including corrosive liquids.

　　四、安裝要求

　　4、 Installation requirements

　　止回閥 ：需注意介質流向與閥體箭頭一致，旋啟式需水平安裝，升降式和球式多用于水平管道。

　　Check valve: It should be noted that the flow direction of the medium should be consistent with the arrow on the valve body. The swing type should be installed horizontally, while the lift type and ball type are mostly used for horizontal pipelines.

　　球閥 ：對安裝方向要求較低，但需確?？趶?、壓力與介質匹配。

　　Ball valve: The installation direction requirements are relatively low, but it is necessary to ensure that the diameter, pressure, and medium match.

　　總結 ：止回閥側重流體單向控制，球閥側重快速啟閉與流量調節，兩者在管道系統中常配合使用以滿足不同需求。選型時需根據具體工況（如壓力、介質、安裝條件）綜合考量。

　　Summary: Check valves focus on one-way fluid control, while ball valves focus on quick opening and closing and flow regulation. The two are often used in conjunction in pipeline systems to meet different needs. When selecting, it is necessary to consider the specific working conditions (such as pressure, medium, installation conditions) comprehensively.

　　本文由  良工閥門山東銷售處  友情奉獻.更多有關的知識請點擊  http://www.bjstar-river.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Lianggong Valve Shandong Sales Office For more related knowledge, please click http://www.bjstar-river.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.